Marantz M-CR610 - Manual (Page 76)

76
Appendix Tips Settings Connections Contents
Front panel Rear panel Index Remote
Playback
Sleep timer function
You can have the power automatically switched to standby once a set
time has elapsed. This is convenient for listening while going to sleep.
1 Press SLEEP and display the time you want to set.
• The
OFF
indicator on the display lights.
• You can set the sleep timer in the range from 10 to 90 minutes in
steps of 10 minutes.
2 To cancel the sleep timer
Press SLEEP to set “Sleep 1 Off”.
The
OFF
indicator on the display turns off.
%
• The sleep timer is also cancelled when this unit is set to the standby mode.
• To check the time remaining until the sleep timer is activated, press SLEEP.
Checking the current time
2 Checking the current time when the power is
on
Press CLOCK.
• Press once more and the display returns to its original condition.
2 Checking the current time when the power is
set to standby
Press CLOCK.
• The current time is displayed for 30 seconds.
NOTE
• The time cannot be set when in the standby mode. Turn on the power first.
Switching the display’s brightness
1 Press DIMMER.
• The display brightness is adjusted each time DIMMER is pressed.
100% (Default) / 75% / 50% / 25% / Off
%
• If you operate the buttons when the display’s brightness is set to “Off”, the display
temporarily lights at the 25% brightness level.