Marantz SR7005 - Manual (Page 20)

16
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
• When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an
HDMI cable.
• When connecting a device that supports Deep Color transmission, please use a “High Speed HDMI
cable” or “High Speed HDMI cable with Ethernet”.
• Video signals are not output if the input video signals do not match the monitor’s resolution. In this case,
switch the Blu-ray Disc/DVD player’s resolution to a resolution with which the monitor is compatible.
• When this unit and monitor are connected with an HDMI cable, if the monitor is not compatible with
HDMI audio signal playback, only the video signals are output to the monitor.
NOTE
• The HDMI signal is not simultaneously output to HDMI 1 and HDMI 2. Select
the connector that you want to use in advance using “Monitor Out” (vpage 82)
in the menu, or by pressing the
HDMI button on the remote control unit or the
HDMI OUT button on the main unit.
• HDMI control function is only supported for the HDMI OUT 1 connector. In order
to use the HDMI control function, connect the television to the HDMI OUT 1
connector.
• The audio signal from the HDMI output connector (sampling frequency, number
of channels, etc.) may be limited by the HDMI audio specifications of the
connected device regarding permissible inputs.
• The front panel HDMI input connector is displayed as “HDMI6” in the “Input
Setup” – “Input Assign” (vpage 70) in the menu.
Connecting to a device equipped with a DVI-D connector
When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to
DVI signals, allowing connection to a device equipped with a DVI-D connector.
NOTE
• No sound is output when connected to a device equipped with a DVI-D connector. Make separate audio
connections.
• Signals cannot be output to DVI-D devices that do not support HDCP.
• Depending on the combination of devices, the video signals may not be output.
n Settings related to HDMI connections
Set as necessary. For details, see the respective reference pages.
Input Assign (vpage 70)
Set this to change the HDMI input connector to which the input source is assigned.
HDMI Setup (vpage 82)
Make settings for HDMI video/audio output.
• RGB Range • Auto Lip Sync • HDMI Audio Out • Monitor Out
• HDMI Control • Standby Source • Power Off Control
NOTE
The audio signals output from the HDMI connectors are only the HDMI input signals.
Connecting an HDMI-compatible device
Cables used for connections
Audio and video cable (sold separately)
HDMI cable
• This interface allows transfer of digital video signals and digital audio signals over a single HDMI cable.
OUT
HDMI
OUT
HDMI
OUT
HDMI
OUT
HDMI
OUT
HDMI
IN
HDMI
IN
HDMI
Blu-ray
Disc
player
DVD
player TV 1
G Rear panelH
Set-top
box
Video
cassette
recorder Game
console TV 2
G Front panelH
OUT
HDMI
Digital
camcorder