MacroSystem Quick-Photo - Manual (Page 8)

If you have the Power Key program you can use the arrow keys to navigate and then
press “m” on the keyboard at the screen which “marks” it for import which makes working
through images considerably faster.
After confirming with ok, then all the selected images
in Quick Photo are read and are shown in the left side of the program window (2) .
6 Size of thumbnails
Here, depending on the setting of screen size in Bogart, you can adjust the icon size of
your photo’s in Quick Photo and therefore have a different number of images visible at any
given time.
At this point you should be selecting between a good balance of clarity and
the amount of photo’s visible. This also depends on the size and resolution of the work
screen. The image size (3) in Quick Photo is adjustable in five steps - Picture 6.
!
Picture 6
It can range from "very small” resolution with very large images - Picture 7 . . . .
! !
Picture 7 Picture 8
. . . up to “very big” resolution but with very small images - Picture 8.
| P a g e 8