MacroSystem Columbus 2 - Manual (Page 2)

Legal notices
To avoid making mistakes during operation, we recommend that you carefully follow the instruc-
tions provided in this manual.
We would also like to point out that the Columbus 2 software has been designed with the hobby
enthusiast in mind.
We have taken a great deal of care while programming and checking this software.
Nevertheless, since it is not possible to guarantee totally error-free software applications in all envi-
ronments and at any time, we unfortunately cannot rule out the possibility that some errors may
have crept in.
If, contrary to all expectations, this is indeed the case, we shall remedy any errors in the program
and supply the affected customers with the new software free of charge. We cannot, however,
accept any liability for loss of data/time or any consequential damages that may occur as a result,
particularly since we have no influence over correct software installation and operation by the custo-
mer.
MacroSystem Digital Video AG and its dealers therefore cannot be held liable for any defects
or unintentional damage in connection with the installation or use of the Columbus software.
MacroSystem Digital Video AG and its dealers do not guarantee fault-free use of the product or
complete flawlessness of the product.
Any implied guarantee is totally out of the question, including guarantee of suitability of the soft-
ware or operating instructions for a particular purpose.
Neither MacroSystem Digital Video AG nor its dealers are responsible for any damages resulting eit-
her directly or indirectly through the use of the software or the operating instructions, e.g. for profit
loss, costs, hardware or software problems or other problems.
Please therefore ensure that you backup your video footage before using the device. We recommend
that you do not delete the video footage and that you create a backup on DV tape beforehand.
Since it is possible that changes have been made to the software after the manual was printed, the
functions shown and described in this manual might differ from the software.