Leprecon LPC V2 User's Manual - Manual (Page 75)

LPC 48 / 96 Users Manual
Page 75
9.2.1 More about the Details screen
Lots of information about the intelligent fixtures in the system is displayed in the
Details screen. The LPC software uses tabs to organize the features of the
system.
Fixture Tabs:
There is a tab at the top of the ‘Details’ screen for each type of fixture in the
system. Clicking on one of the tabs will show the fixtures of that type.
Inside each tab, fixtures can be selected and deselected without returning to the
main screen. Intensity can be adjusted for selected fixtures as well.
Shortcut buttons at the bottom of the fixture tabs can be used to select and
deselect all the fixtures at one time, clear all data from selected fixtures, or set
selected fixtures to default values for all properties; Color, Beam, and Position.