Lpc 48 / 96 users manual – Leprecon LPC V2 User's Manual User Manual
Page 15
LPC 48 / 96 Users Manual
Page 15
3.4 Creating a Custom Patch.
1.
Select the
Set up tab; select the Patch tab.
2.
The patch list window will open, and Default (System) (Active) is
highlighted in green.
3.
Select the
New tab in the left column. A window will open with the
message, “Enter name for the new patch”.
4.
The icon to the right of the dialog box is an onscreen keyboard which can
be used to name the patch. If a name is not given, “Patch 01” is the
default.
5.
Select
Save and the new patch will appear in the Patch List window, (See
Figure 6).
6.
Select the Newly named patch from the list; it should now be highlighted in
green.
7.
To make the patch Active, select the
Apply tab located on the left column.
Active will appear next to the name in the Patch list.