Leprecon LPC V2 User's Manual - Manual (Page 52)

LPC 48 / 96 Users Manual
Page 52
6.7 Cue Properties
Cue fades are handled with three front panel buttons:
Go - Starts the fade to the next cue
Hold - Stops the fade. Press 'Go' to resume.
Back - Reverses a fade that is in progress
For automatically timed cross fades, press the Go button. The cues will fade up
and down according to the fade times associated with the cue.
6.8 Taking Control with the Manual Crossfader
After cues have been played back with the Go button, the manual fader can be
used to advance the cue stack. This requires pressing the Hold key to stop
further timed fades.
1. Press Hold. An indicator will appear on screen that cue playback is on
Hold.
2. Move the Manual Crossfader to the bottom position, then to the top to
match the level of the completed fade. The Hold indicator will turn off, and
the word ‘ Manual’ at the top of the Cue Run screen will change to a bold
font.
3. Move the Manual Crossfader from the top position to the bottom position
to change to the next cue.