Leprecon LPC V2 User's Manual - Manual (Page 53)

LPC 48 / 96 Users Manual
Page 53
If the Hold button is pressed in the middle of a timed fade, the manual crossfader
can be used to resume the fade. The procedure is similar:
1. Move the Manual Crossfader to the bottom position.
2. Move the Manual Crossfader up from the bottom position until it matches
the current fade position. The Hold indicator will turn off, and the word
‘Manual’ at the top of the Cue Run screen will change to a bold font.
3. Once the level is matched, the manual fader will have control. Move the
Manual Crossfader to the top position to complete the fade.
Figure 32: Cue Control Section