Leprecon LPC V2 User's Manual - Manual (Page 114)

LPC 48 / 96 Users Manual
Page
114
12 Wireless DMX option
12.1 Wireless DMX Properties
LPC models are available with optional wireless DMX capability, using W-DMX
compatible format. The LPC supports 2 DMX universes, however, only Universe
A will be transmitted via Wireless DMX.
The wireless transmitter has a simple interface with one LED and one
momentary function switch, (See Figure 37).
The LED shows the current state of the wireless DMX link:
ON – Normal DMX link operation
Fast blink – Linking all available receivers
Slow blink – Unlinking all receivers
To set up a Wireless DMX System:
1. Power on only the receiver units to be used with the LPC DMX universe -
ensure that they are not linked with any other transmitter (Receiver LINK
indicators should be OFF).
2. On the transmitter unit, press and release the FUNCTION switch. The
transmitter will scan for all unlinked receivers for a period of ten seconds.
The LINK indicator will flash rapidly.
If successful, each receiver’s LINK indicator will go ON. If any fail, check that the
receiver is in range and repeat procedure.