Leprecon LPC V2 User's Manual - Manual (Page 71)

LPC 48 / 96 Users Manual
Page 71
9.1 Setting Intensity for Intelligent fixtures
If intelligent fixtures have Intensity assigned to board channels, you can use
faders, or the Channel key to select and set level for them. See section 8.1 –
DMX Assignment for more information about this option.
The fixtures in the illustration above were assigned with Intensity channels
mapped to board channels. In the case shown, board channels 49 through 60
are used to control the intensity of the intelligent fixtures.
If board channels were NOT assigned to the fixture intensity control, the Stage
screen will look like this:
Notice that the fixtures are still shown on screen, but have no channel numbers
associated with them.