Features – Dynex DX-RCRT20-09 User Manual
Page 9

Features
9
3
INPUT
Press this button to select the video input source. (TV, AV, [S-VIDEO],
COMPONENT)
4
DTV Audio
Press to choose between different TV program languages when the
signal contains different languages.
5
ENTER
Press to make or confirm selections in the on-screen display (OSD)
menus.
6
MENU
Press to open the OSD.
7
VOL– / VOL+
Press to decrease or increase the volume. In some cases, press this
button to change an OSD setting.
8
SLEEP
Press this button to set the TV to turn off after a preset amount of
time. To confirm the sleep time setting, press this button once and
the remaining time is momentarily displayed. To cancel sleep time,
press this button repeatedly until 0FF is displayed.
9
CCD
Press this button to select CCD mode.
10
GUIDE
Press this button to display the program guide for cable or satellite
TV.
11
EXIT
Press
this
button to exit the OSD.
12
POWER
Press
this
button to turn the TV on. Press again to turn the TV off.
13
DISPLAY
Press
this
button to display channel status and signal information.
14
TV/DTV
Press
this
button to select analog (TV) or digital (DTV) TV mode.
15
Number buttons
(0-9)
Press these buttons to directly go to any channel.
16
PICTURE
Press this button to select the picture mode.
17
•
Press this button to select a digital TV sub-channel. For example, to
select channel 54, sub-channel 3, press 54, press •, press 3, then
press ENTER.
18
CH– / CH+
Press these buttons to change to a lower or higher numbered
channel set into memory. When the OSD is open, press to adjust
options and make selections.
19
ZOOM
Press this button, in 16:9 digital TV mode, to select the aspect ratio
of the picture.
20
FAVORITE
Press this button to open the DTV favorites list.
21
CH.LIST
Press this button to open the DTV channel list.
Item
Button
Description