Dynex DX-RCRT20-09 - Manual (Page 23)

Using your TV
23
Setting the time
To set the time:
1 Press MENU on the TV or remote control. The on-screen display (OSD) opens.
2 Press VOL+ or VOL– to select TIME, then press CH –. The TIME menu opens.
3 Press CH + or CH – to select TIME, then press CH + or CH – to select --:-- AM.
4 Press VOL+ or VOL– to change the setting.
5 Press MENU one or more times to close the OSD.
Note: The time will need to be reset after a power failure or if you disconnect the power cord.
Setting the timer
You can use the timer to set when you want your TV to automatically turn on or off. The timer
turns your TV on or off each day at the same (set) time. If you want to set a timer to
automatically turn off your TV just one time, use the sleep timer (see “To set the sleep timer:”
on page 26).
To set the timer to turn your TV on:
1 Press MENU on the TV or remote control. The on-screen display (OSD) opens.
2 Press VOL+ or VOL– to select TIME, then press CH –. The TIME menu opens.