Dynex DX-RCRT20-09 - Manual (Page 22)

22
Using your TV
Selecting the color system for analog TV (ATV)
To select the color system for ATV:
1 Press MENU on the TV or remote control. The on-screen display (OSD) opens.
2 Press VOL+ or VOL– to select CHANNEL, then press CH –. The CHANNEL menu opens.
3 Press CH + or CH – to select COLOR SYSTEM, then press VOL+ or VOL– to select
AUTO or NTSC.
4 Press MENU one or more times to close the OSD.
Note: The COLOR SYSTEM option only appears if the TV signal is analog.
Displaying channel and program information
To display channel and program information for analog TV:
1 Press DISPLAY. The currently selected channel and audio mode is displayed in the
upper-right corner of the screen.
2 Press DISPLAY again to turn off the display.
To display channel and program information for digital TV:
1 Press DISPLAY. The currently selected channel and signal mode is displayed in the
upper-right corner of the screen.
2 Press DISPLAY again. Information about the currently selected channel and program
appears. The information includes:
• Channel title
• Audio language
• Program content
• Program air time
• Channel number
• Closed caption mode
3 Press DISPLAY again to turn off the display.