Datalogic Scanning DS6400 - Manual (Page 110)

DS6400
5
5.2.2 Scanner Replacement Procedure
NOTE
The ASR procedure requires replacing one scanner at a time.
Slave
s).
3. Power up the system and wait for initialization.
Mas
he new Master.
4. Power up the system and wait for initialization.
1. Power down the entire system.
2. Replace the Slave scanner with a new one (default setting
ter
1. Load the saved configuration from file (.ddc) to t
2. Power down the entire system.
3. Replace the Master scanner with the new one.
NOTE
The ASR works only if both the Master and Slave devices have software
6.40 or later.
94