Motorola DP 4400 UHF - Manual (Page 40)

Advanced Features
English
32
Multi-Site Controls
These features are applicable when your current radio channel
is part of an IP Site Connect or Linked Capacity Plus
configuration.
See IP Site Connect on page 10 and Linked Capacity Plus on
page 11 for more details about these configurations.
Starting an Automatic Site Search
NOTE: The radio only scans for a new site if the current signal
is weak or when the radio is unable to detect any signal
from the current site. If the RSSI value is strong, the
radio remains on the current site.
Procedure:
1 Press the programmed Site Lock On/Off button.
2 A tone sounds.
3 The LED blinks yellow rapidly when the radio is actively
searching for a new site, and turns off once the radio locks
on to a site.
The radio also performs an automatic site search (site is
unlocked) during a PTT button press or data transmission if
the current channel, multi-site channel with an attached roam
list, is out of range.
Stopping an Automatic Site Search
When the radio is actively searching for a new site:
Procedure:
1 Press the programmed Site Lock On/Off button.
2 A tone sounds and the LED turns off.
Starting a Manual Site Search
Procedure:
1 Press the programmed Manual Site Roam button.
2 A tone sounds and the LED blinks green.
3 You hear a positive indicator tone and the LED turns off,
indicating the radio is locked on to a site.
OR
You hear a negative indicator tone and the LED turns off,
indicating the radio is unable to lock on to a site.
NKP_EMEA.book Page 32 Monday, July 2, 2012 3:50 PM