beautypg.com

Emergency operation, Sending an emergency alarm, Advanced features – Motorola DP 4400 UHF User Manual

Page 35

background image

Advanced Features

English

27

Emergency Operation

An Emergency Alarm is used to indicate a critical situation. You
are able to initiate an Emergency at any time, in any state, even
when there is activity on the current channel.

Your dealer can set the duration of a button press for the
programmed Emergency button, except for long press, which is
similar with all other buttons:

Short press

Between 0.05 seconds and 0.75 seconds

Long press

Between 1.00 second and 3.75 seconds

The Emergency button is assigned with the Emergency On/Off
feature. Check with your dealer for the assigned operation of
the Emergency button.

If short press the Emergency button is assigned to turn on the
Emergency mode, then long press the Emergency button is
assigned to exit the Emergency mode.

If long press the Emergency button is assigned to turn on the
Emergency mode, then short press the Emergency button is
assigned to exit the Emergency mode.

Your radio supports three Emergency Alarms:

Emergency Alarm

Emergency Alarm with Call

Emergency Alarm with Voice to Follow

In addition, each alarm has the following types:

Regular

Radio transmits an alarm signal and shows audio

and/or visual indicators.

Silent

Radio transmits an alarm signal without any audio or

visual indicators. Radio receives calls without any sound

through the radio’s speaker, until you press the PTT button to

initiate the call.

Silent with Voice

Radio transmits an alarm signal without

any audio or visual indicators, but allow incoming calls to

sound through the radio’s speaker.

Only one of the Emergency Alarms above can be assigned to
the programmed Emergency button.

Sending an Emergency Alarm

This feature allows you to send an Emergency Alarm, a non-
voice signal, which triggers an alert indication on a group of
radios.

Procedure:

1

Press the programmed Emergency On button.

2

The LED lights up solid green.

3

When an Emergency Alarm acknowledgment is received,
the Emergency tone sounds. The LED blinks green.
OR
If your radio does not receive an Emergency Alarm

NKP_EMEA.book Page 27 Monday, July 2, 2012 3:50 PM

This manual is related to the following products: