Kleenmaid TO901X - Manual (Page 6)

4
Product Features
2
B3
91
41
1
TIMER CLOCK COOK STOP LIGHT LOCK PREHEAT
HI
MED
LO CLEAN PRESET
TEMPERATURE
OFF CLEAN
BROIL
DEHY.
CONV. BAKE
CONV. BROIL
CONV. ROAST FAST PREHEAT BAKE
SETTINGS
Convection Fan
and Element
(not visible)
Model and Serial
# Plate
Door Gasket
Halogen Light Grill Element
Control panel
Halogen Light
Rack Levels
4
3
2
1
Cooling Vents
Bake Element
(not visible)
Door Lock
Probe
Receptacle
Figure 1
About Your Oven
Above you will find an illustration of a Kleenmaid
oven showing the components of the oven.
Cooling Fan
The oven has a cooling fan to cool the control
panel.
You may hear this fan continue to run after
cooking and/or cleaning has been completed.
The fan will run as long as the oven is hot and the
oven’s function selector is turned to any position
other than “Off”.
This is normal operation.
Rack Positions
The oven has rack guides at four levels as shown
in the illustration.
Each level guide consists of paired supports
formed in the sidewalls on each side of the oven
cavity.
The rack should be positioned within the paired
supports.
Each oven is provided with the following parts
and utensils.
TO901X - single oven
TO951X - both upper and lower ovens
• 2 x wire shelves
• 1 x telescopic rack
• 1 x insert grill wire rack
• 1 x baking pan
Always be sure to position the oven racks, etc.
before turning the oven on.
Make sure that the rack(s) are level once they are
in position.
To remove oven rack from the oven, lift rack at
front and lift out. For telescopic rack see the
special sheet provided with it.
To replace oven rack:
1. Place rear of rack between the rack level
guides.
2. While lifting front of the rack, slide the rack in
all the way, then lower front. Please refer to
the illustration on the following page if there is
any question as to which side is the front of
the rack.