Kleenmaid TO901X - Manual (Page 33)

31
WALL INSTALLATION - SINGLE OVEN
.ni
m
52
550 min
opening
depth
710 opening width
gni
ne
po
58
5
th
gi
eh
.ni
m
5
579
th
gi
eh
09
5
745 width
565
depth
Secure oven to cabinet using the screws
provided. Screws should be inserted
through the mounting holes in the
positions indicated in the frame (open
door to see frame and mounting holes).
Do not overtighten screws.
114223A2
Figure 9
Note:
1. Do not slide oven across floor. Damage to
floor covering or floor could result.
2. The oven support surface must be a minimum
19 mm thick plywood platform, solid, level and
flush with the bottom of the cabinet cutout.
3. Use extreme caution when moving or
installing the oven. It is very heavy.
4. Be very careful when moving or installing the
oven to avoid damage to the oven frame or
damage to the cabinets.
5. Be sure to level oven. An oven that is not
level may provide poor or inconsistent baking
results.
6. Be careful when placing oven. DO NOT pinch
the wiring between the oven back or wall and
the inner cabinet wall or floor.
WARNING!
Securely fasten oven to cabinet using the
screws provided. Failure to do so could result
in oven moving or tipping during use and
causing damage to the oven or cabinets or
personal injury.
NOTE : We recommend Flush Fitting : Refer to Kleenmaid Technical Specifications