Kanguru U2D - Manual (Page 32)

30
5.2 System Info
The SYSTEM INFO function allows you to view information regarding your Kanguru USB Duplicator’s
firmware version and build.
To view the system information:
1. From the ADVANCED SETUP menu, tap the ‘SET’ button to navigate to the SYSTEM INFO
function.
2. Tap the ‘RUN’ button to begin viewing the system’s information:
KANGURU DUPLICATOR
VER: 3.01S BLD: 0708
Firmware version Build version
3. Tap the ‘SET’ button to exit back to the ADVANCED SETUP menu.
5.3 Set to Default
The SET TO DEFAULT function allows you to restore all settings back to their factory default values.
To reset your Kanguru USB Duplicator to its original default configuration:
1. From the ADVANCED SETUP menu, tap the ‘SET’ button to navigate to the SET TO DEFAULT
function.
2. Tap the ‘RUN’ button. The screen will display a message asking you to confirm the reset. Tap the
‘RUN’ button to confirm, or tap the ‘SET’ button to cancel.
ARE YOU SURE ?
SET - > NO
RUN - > YES
3. Once the reset has been completed, you will be displayed a confirmation message on the screen.
Press any button to return to the ADVANCED SETUP menu.
System Info / Set to Default