Kanguru U2D User Manual

Page 14

then it will copy in FULL mode. The USB Duplicator supports the following file systems: FAT,

FAT32, NTFS, EXT2, EXT3, EXT4, HFS

○ If it is able to recognize the file system of the Source, it will compare the capacity between the

Source and the Target.

- If the Source’s capacity is smaller than the Target then it will copy in RESIZE mode. The

system will determine whether it needs to execute in Resize mode based on the NEED

RESIZE option under the ADVANCED SETUP menu (see section 5.11 Need Resize on page

33).

- If the Source’s capacity is equal to the Target, then it will copy in BRIEF mode.

- If the Target drives are of mixed capacities, it will determine a suitable copy mode based on

the capacity of the smallest Target drive.

- If the Target drives are of mixed capacities and the difference between drives exceeds the

MOST VAR. CAP parameter, then the higher capacity drives that exceed the MOST VAR.

CAP parameter will be excluded from the duplication. The MOST VAR. CAP parameter can

be configured under the ADVANCED SETUP menu (see section 5.10 Most Var. Cap on

page 33).

Duplication Modes