Kanguru 5HD Tower Duplicator - Manual (Page 5)

5
Introduction
1. INTroDUCTIoN
Congratulations on your purchase of the Kanguru Clone Tower Duplicator from Kanguru Solutions.
The Kanguru Clone is a high speed, stand-alone SATA hard drive duplicator that can make up to 5
or 11 hard drive clones simultaneously (depending on model). The duplicator has many advanced
features for IT professionals, yet a novice can begin duplicating hard drives within minutes of taking
it out of the box.
The Kanguru Clone copies the content of a Master hard drive to up to 5 or 11 target drives simultaneously
(depending on model). With fast copy speeds up to 6GB/min, the Kanguru Clone is the economical
choice for your duplication project.
Features
√ Up to 6GB/min transfer rates
√ Simultaneously duplicate up to 5 or 11 hard drives (depending on model)
√ Capacity and brand independent
√ Supports all standard 3.5” SATA hard drives. Master & Target drives can be different capacities,
brands and models.
√ Tool-free installation. 3.5” SATA drives can be connected to the duplicator without the need for
trays, cabling or adapters.
√ 2.5” SATA hard drive up to 9.5mm thickness supported with adapters (additional 2.5” adapters
sold separately)
√ Duplicates any operating system: including DOS, Win98, Win2K, Win NT, Win XP, Win Vista,
Win 7, Win 8, Linux, Mac OS X and many more.
√ One-year Standard Warranty: This system comes complete with a one-year parts and 90 day
labor warranty. One-year and two-year extended warranties available, contact Kanguru sales for
more information.
√ 3 Convenient Copy modes:
○ brief Copy - Copies only sectors with data (compatible with most major file systems)
○ resize Copy - Copies from smaller Source drives to larger Target drives
○ Disk Copy - Full, sector for sector duplication
√ Supports HPA (Host Protection Area) and DCO (Device Configuration Overlay) copy
√ Up to 999 x wipe cycles (7 x wipe cycles complies with the American DOD 5220-22.M Standard)