Kanguru 5HD Tower Duplicator - Manual (Page 14)

14
2.3 Defining Copy and/or Compare Functionality
Before performing a duplication, take a moment to define the SET COPY and SET COMPARE
options under the Setup menu. These options will tell the duplicator how the BRIEF, RESIZE and
DISK modes will operate.
2.3.1 Set Copy Functionality
When enabled BRIEF, RESIZE and DISK modes will execute as a Copy process. The SET COPY
option is enabled by default.
To change the SET COPY option:
1. From the Main menu, press the UP or DoWN button to navigate to the SETUP option.
2. Press the ENT button to enter the Setup menu.
3. Press the UP or DoWN button to navigate to the SET COPY option. The SET COPY option is
marked with an asterisk by default, signifying that copy functionality is currently enabled.
4. Press the ENT button to toggle whether copy functionality is enabled or disabled.
When SET COPY has been enabled, the word “COPY” will be displayed next to each duplication
mode in the Main menu:
[DISK ]COPY
0 PASS 0 FAIL
Note: You cannot disable the SET COPY option if the SET COMPARE option is also disabled.
Defining Copy and/or Compare Functionality