Kanguru e-Flash - Manual (Page 18)

18
2.2.2 Using the eFlash as a USB device
Windows Users
The eFlash will appear in the Hard Disk Drives section under My Computer.
Mac Users
The eFlash will appear on your desktop as a drive icon.
You can now access the eFlash as you would a standard USB device.
Removing the eFlash
Before attempting to remove the eFlash, make sure that no data is being transferred to or from the
device. The easiest way to determine that no data is being transferred to or from the device is to check
that the red LED indicator near the eFlash’s USB connection is not blinking. Be sure to follow safe
removal procedures. Failure to do so may result in data corruption.
Windows Users
1. Left click on the Safely Remove Hardware icon in the taskbar.
2. Select the eFlash from the popup menu.
3. A message will appear informing you that it is safe to remove the device.
If you receive a message that the device cannot be removed, close any programs that may be accessing
the device and then try to safely remove it again.
Mac Users
To safely remove the device, drag the eFlash drive icon on the desktop into the trash can.
3. Maintenance and Care
• This is an electronic device. It requires careful handling and use.
• Keep the device free from dust and contaminants by always replacing the safety caps when the
device is not in use.
• Keep liquid and moisture away from the drive.
• Clean the exterior of the device by wiping with a soft, dry cloth. Do not use any harsh or abrasive
cleaning agents as it could damage the surface of the device.
• Do not attempt to open or repair the device yourself. There are no serviceable parts inside.
Opening the device or attempting unauthorized repairs will void your warranty. If you need to
have the device serviced, contact Kanguru Solutions Tech Support at 508-376-4245.
Connecting and Using Your Kanguru eFlash