Kanguru e-Flash - Manual (Page 11)

11
2.1.1.2 Connecting your eFlash through Power Over eSATA
If your computer has a Power Over eSATA port, simply remove the cap from the eFlash’s eSATA
connection and then connect the device to the Power Over eSATA port either directly or by using the
provided Power Over eSATA cable.
Note: Some newer laptops come with an eSATA/USB combo port. If you have an eSATA/USB
combo port on your laptop, you can use it with the eFlash as a Power Over eSATA port.
Note: The provided Power Over eSATA cable was designed specifically for transferring data and
power through the Power Over eSATA connection. Standard eSATA cables will transfer data but not
power, even if connected to a Power Over eSATA port.
For information on using the eFlash as an eSATA device see section 2.2.1 eSATA, p.14.
Connecting and Using Your Kanguru eFlash