Johnson Amplification J-STATION - Manual (Page 26)

Depth - Sets the intensity in the Flange effect. Depth is only available in the Deep Level edit
mode and is accessed by selecting Parameter number 23. Values range from 00 to 99.
Regen - This Parameter sets the amount of regeneration which is perceived as the up and down
motion of the Flanger. Regeneration is only available in the Deep Level edit mode and is
accessed by selecting Parameter number 24. Values range from 00 to 99.
Phaser (value 02)
A phaser splits the incoming signal, and then changes the phasing of the signal.This signal is then
taken in and out of phase and mixed back in with the original signal. As the phasing changes, differ-
ent frequencies get canceled resulting in a warm sort of twisting sound.The J-Station breathes new
life into this classic effect by adding regeneration.
Speed - Controls the rate of the Phaser sweep.This Parameter is accessed in Top Level editing by
pressing the Shift button and rotating the Effects/Speed knob. It is accessed in Deep
Level editing by selecting Parameter number 22.Values range from 00 to 99.
Depth - Sets the intensity or amount of Phase change in the split signal. Depth is only available in
the Deep Level edit mode and is accessed by selecting Parameter number 23. Values
range from 00 to 99.
Regen - This Parameter adjusts the amount of phased sound fed back to the input of the Module.
High regeneration settings produce dramatic and interesting unnatural sounds.
Regeneration is only available in the Deep Level edit mode and is accessed by selecting
Parameter number 24. Values range from 00 to 99.
Tremolo (value 03)
A Tremolo effect modulates the volume of the incoming signal at a steady even rate.The incoming
signal will go back and forth between getting louder and softer. It is kind of like having a motor on
your guitar’s volume knob which increases and decreases the volume at an even rate.
Speed - Controls the rate of volume modulation.This Parameter is accessed in Top Level editing
by pressing the Shift button and rotating the Effects/Speed knob. It is accessed in
Deep Level editing by selecting Parameter number 22.Values range from 00 to 99.
Depth - Adjusts the intensity of the Tremolo effect. Depth is only available in the Deep Level edit
mode and is accessed by selecting Parameter number 23. Values range from 00 to 99.
Rotary Speaker (value 04)
Rotary Speaker is an emulation of a device that included a spinning horn and woofer.The rotation
of these two speakers produced an interesting combination of the sound panning from side to
side, as well as a slight pitch change due to the sound coming towards, and then going away from
the listener. The rotary speaker parameters are as follow:
Speed - Controls the rate of the simulated spinning speakers.This Parameter is accessed in Top
Level editing by pressing the Shift button and rotating the Effects/Speed knob. It is
accessed in Deep Level editing by selecting Parameter number 22.Values range from 00
to 99.
Depth - Controls the stereo separation of the perceived rotation. Depth is only available in the
Deep Level edit mode and is accessed by selecting Parameter number 23. Values range
from 00 to 99.