Jetway Computer NF3E - Manual (Page 48)

43
24bit Single]; [1280 x 768 24bit Single]; [1280 x 800 18bit Single]; [1280 x 800
24bit Single]; [1366 x 768 18bit Single]; [1366 x 768 24bit Single]; [1440 x 900
18bit Dual]; [1440 x 900 24bit Dual]; [1280 x 1024 24bit Dual]; [1680 x 1050 24bit
Dual]; [1920 x 1080 24bit Dual].
▶ Memory Configuration
Press [Enter] to view current memory configuration.
▶ PCH-IO Configuration
Press [Enter] to make settings for the following sub-items:
▶
USB Devices Configuration
Press [Enter] to further setting USB device configuration.
USB Devices Configuration
XHCI Mode
Use this item to control the USB XHCI controller.
The optional settings are: [Smart Auto]; [Auto]; [Enabled]; [Disabled].
* Note: When set as [Disabled], user can make further settings in ‘EHCI’.
EHCI1
Use this item to control the USB EHCI (USB 2.0) functions.
One EHCI controller must always be enabled.
The optional settings are: [Disabled]; [Enabled].
Azalia
The optional settings are: [Disabled]; [Enabled].
Onboard Lan1 Controller
Use this item to enable or disable onboard NIC.
The optional settings are: [Enabled]; [Disabled].
Wake on LAN
Use this item to enable or disable integrated LAN to wake the system (The
Wake On LAN cannot be disabled if ME is on at Sx state).
The optional settings are: [Enabled]; [Disabled].
Onboard Lan2 Controller
Use this item to enable or disable onboard LAN2 controller.