Jetway Computer NF3E - Manual (Page 43)

38
The optional settings are: [AHCI]; [RAID].
SATA Controller Speed
The item is for user to set the maximum speed the SATA controller can support.
The optional settings are:[Default]; [Gen1]; [Gen2];[Gen3].
SATA1
The optional settings are: [Enabled]; [Disabled].
mSATA
The optional settings are: [Enabled]; [Disabled].
 Intel(R) Rapid Start Technology
Press [Enter] to go to ‘Intel(R) Rapid Start Technology’ screen to make further
settings.
Intel(R) Rapid Start Technology
The optional settings: [Disabled]; [Enabled].
 Network Stack Configuration
Press [Enter] to go to ‘Network Stack’ screen to make further settings.
Network Stack
Use this item to enable or disable UEFI Network Stack.
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
Ipv4 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv4 PXE Boot Support. When set as [Disabled], Ipv4 boot
option will not be created.
Ipv6 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv6 PXE Boot Support. When set as [Disabled], Ipv4 boot
optional will not be created.
PXE boot wait time
Use this item to set wait time to press [ESC] key to abort the PXE boot.
Media Detect Count
Use this item to set number of times presence of media will be checked.