Jetway Computer NF3E User Manual

Page 47

Aperture Size
The optional settings are: [128MB]; [256MB]; [512MB].
DVMT Pre-Allocated
Use this item to select DVMT 5.0 pre-allocated (fixed) graphics memory size used
by the internal graphics device.
The optional settings are: [32M]; [64M]; [96M]; [128M]; [160M]; [192M]; [224M];
[256M]; [288M]; [320M]; [352M]; [384M]; [416M]; [448M]; [480M]; [512M].
DVMT Total Gfx Mem
Use this item to select DVMT 5.0 total graphics memory size used by the internal
graphics device.
The optional settings are: [128M]; [256M]; [MAX].
LCD Control
Primary IGFX Boot Display
Use this item to select the video device which will be activated during POST. This
has no effect if external graphics present. Secondary boot display selection will
appear based on your selection. VGA modes will be supported only on primary
display.
The optional settings are: [VBIOS Default]; [HDMI1]; [HDMI2]; [LVDS].
*When set as [HDMI1];[HDMI2] or [LVDS], the following sub-item shall appear:
Secondary IGFX Boot Display
The optional settings are: [Disabled]; [HDMI1]; [HDMI2]; [LVDS].
Active LVDS
The optional settings are: [Disabled]; [Enabled].
[Disable]: VBIOS disable LVDS.
[Enable]: VBIOS enable LVDS.
* Note: When set as [Enabled], user can make further settings in ‘LVDS Panel
Type’.
LVDS Panel Type
Use this item to manually select LVDS panel type.
The optional setting are: [800x 480 18bit Single]; [800x 600 18bit Single]; [800x
600 24bit Single]; [1024 x 600 18bit Single]; [1024 x 768 18bit Single]; [1024 x 768