beautypg.com

To send route directions, Sending tracks, Third-party gps – DeLorme Topo North America 9.0 User Manual

Page 212: To send tracks

background image

DeLorme Topo North America 9.0 User Guide

208

3. Under Select Device, select GPS or point to Athletic Device and then select your

device.

4. Select Send to Device.
5. Select Route Points from the Object Type drop-down list.
6. Click Next.
7. From the Route drop-down list, select the route file that contains the route points

you want to send to your device.

8. To avoid overwriting existing points on your device, type a starting point for the new

points and select the Prefix a Number to the Waypoint Name check box. Not all

devices support starting points. For more information, see your device manual.

9. Click Send to Device.
10. Repeat the steps for every route file you want to send to your device.
11. Click Finish.

To Send Route Directions

Use the following steps to send route directions to your GPS device.

1. Connect your device to your computer.

You may have to use specific settings for your device. For example, if you are using

a GARMIN GPS receiver, set your GARMIN receiver interface to GRMN/GRMN. For

more information, see your device owner manual.

2. Click the arrow next to the Sync button

on the toolbar and click Other

Device to open the Exchange Wizard.

3. Under Select Device, select GPS or point to Athletic Device and then select your

device.

4. Select Send to Device.
5. Select Route Directions from the Object Type drop-down list.
6. Click Next.
7. From the Route drop-down list, select the route file that contains the route

directions you want to send to your device.

8. Designate a route name and/or a route number for the file on the device (device

dependent).

9. To avoid overwriting existing points on your device, type a starting point for the new

points and select the Prefix a Number to the Waypoint Name check box. Not all

devices support starting points. For more information, see your device manual.

10. Click Send to Device.
11. Repeat the steps for each route file you wan to send to your device.
12. Click Finish.

Sending Tracks

Third-party GPS

If you have a compatible GPSor athletic device, you can use the Exchange Wizard to send

tracks to your device.

To Send Tracks

Use the following steps to send tracks to your device.