DeLorme Topo North America 9.0 User Manual
Page 153

DeLorme Topo North America Help
149
Using GPS
If you are using a GPS device with your program on a portable computer to navigate the
route you created, use the following steps.
• NavMode is the default view when GPS tracking. If you want to use the tab view
when travelling, click the NavMode
button on the toolbar. For more information
about NavMode and the GPS tab, see
• The E-Z Nav route wizard is on by default. When planning a long trip, disable E-Z
on the GPS tab in the Options dialog box
Step 1—Get ready to travel
1. Connect your GPS device to your portable computer. Ensure the speakers are turned
on and loud enough for you to hear while driving.
on the GPS tab in the Options dialog box
3. Click the GPS button
• If you are using a GPS device that is not a DeLorme Earthmate GPS device,
• If your GPS location is not the same as the start location of your trip, you will
be prompted to navigate with it or hide it. Click Navigate.
4. If your map file is not open, open it.
Step 2—Optional. Find points of interest along your route
GPS Radar option on the Find tab
to find points of interest along your route
as you travel.
1. Set your GPS Radar preferences on the Find Tab in the Options dialog box. If you are
using NavMode, make sure the Repeat the search every... check box is selected.
2. Click the Find tab and click the GPS Radar subtab to search for your category of
interest.
If you selected the Search only in direction of travel check box in the Options
dialog box, you won't have to back track to make your next stop; however, if you're
driving in a very rural area, the closest point of interest may be behind you. For
Find Points of Interest on a Route
Points Near Your Current Location
Step 3—Start driving
If you have set up speech recognition software, you can ask the computer questions like,
"What is the next turn?" or "Where am I?" For more information, see
. This
view shows the beginning of our trip using NavMode.