Ivoclar Vivadent Variolink II - Manual

Variolink ® II
Instructions for Use
Description
Variolink II is a dual-curing (light- and self-curing) luting
composite system for the adhesive luting of ceramic, and
composite restorations.
Variolink II may also be applied in the light-curing
technique only (e.g. luting of veneers). For this purpose,
only the Variolink II Base is to be used.
Variolink II is based on the Advanced Composite Technology
of Tetric
© Ceram. The special filler composition of this
technology gives Variolink II excellent physical properties,
high abrasion resistance, excellent radiopacity, very good
optical properties, as well as continuous fluoride release.
Variolink II is available in 6 base shades and 2 catalyst
shades as well as in 3 degrees of viscosity. Thus, an
appropriate version of Variolink II is available for the
various clinical requirements.
Shades
The following shades of Variolink II Base are available:
Chromascop A–D
Base
bleach XL
010 –
transparent T –
white 110 A1
white opaque – –
yellow (universal) 210 A3
brown 340 A4
Catalyst high/low viscosity:
yellow (universal)
210 A3
transparent T –
Catalyst ultra viscosity
yellow (universal)
210 A3
Working time
About 3.5 min. at 37 °C/99 °F
– Dual-curing/light-curing resin based dental luting material
– Dualhärtender/lichthärtender zahnärztlicher Befestigungskunststoff
– Matériau de restauration "Dual" de collage
– Cemento composito su base resinosa ad indurimento duale (auto-
fotoindurente)
– Cemento de fijación en base a composite de polimerización dual y
fotopolimerizable
– Compósito de cimentação fotopolimerizável / polimerização dual.
561836/0304/WE1/H
English
Instructions for Use
Gebrauchsinformation
Mode d’emploi
Istruzioni d’uso
Instrucciones de uso
Instruções de Uso
For dental use only.
Caution: U.S. Federal Law restricts this device to sale by or on
the order of a licensed dentist.
Made in Liechtenstein
Ivoclar Vivadent AG, FL-9494 Schaan/Liechtenstein
Variolink II-WE1-GI-NEU.qxd 20.04.2004 09:22 Uhr Seite 1