Ivoclar Vivadent SR Nexco Paste - Manual (Page 9)

9
SR Model Seperator, 10 ml
the Sr model Separator is suitable for separating
working dies during the fabrication of metal-free
restorations and adjoining stone surfaces during lab
composite veneering.
SR Retention Adhesive, 20 ml
this adhesive varnish is utilized to affix micro- and
macroretention beads to the restoration surfaces after
contouring.
SR Microretention Beads, 15 ml
SR Macroretention Beads, 15 ml
two different sizes of retention beads are available,
depending on space conditions.
– microretention: 200–300 microns
– macroretention: 400–600 microns
SR Mixing Pad, small
SR Mixing Plate, small
depending on the material to be
processed, the Sr mixing Pad and
Sr mixing Plate may be used. the pad is
mainly used to process liquid Sr nexco
materials so that time-consuming
cleaning of the plate can be avoided. In
contrast, the plate is used to mix the more viscous composite
components. the light protective cover of the plate extends the
working time of the materials.
Universal Polishing Paste, 100 ml
the Sr Universal Polishing Paste
enables quick and efficient polish-
ing of composite and metal
restorations.
the paste is particularly suitable for prepolishing and principal
polishing of Sr nexco veneers.
Universal Holder
Used to handle disposable brushes and
sponges and thereby help facilitate the
working procedures in the dental laboratory.
Disposable Brushes, 50x
the disposable brushes are particularly
suitable for the application of liquid
materials, such as Sr model Separator,
Sr Link and Sr nexco opaquer.
Disposable Sponges, 50x
the disposable sponges have been
modified to fit into the universal holder.
they are used to remove the inhibition
layer after polymerization of the
opaquer and Liner.
Cannulas, 10x
these application aids can be attached to
Liner, opaquer and Stains syringes. they
help achieve more accurate dosing and
cleaner application procedures as the
extrusion pressure can be controlled.
Cannula Caps, 20x
the cannula caps prevent the material from
drying out or polymerizing prematurely while
it is in the cannula and provide protection
against contamination.