Ivoclar Vivadent SR Nexco Paste User Manual

Page 8

Accessories

SR Link, 5 ml

Sr Link is a metal/composite bonding agent that
provides a covalent bond between metal frameworks
and Sr nexco. Sr Link is an easy-to-use and, above
all, tried-and-tested bonding system that can be used
in conjunction with a wide selection of alloys.
the bonding system is suitable for use on frame-
works made of
– alloys that contain less than 90% gold, palladium and platinum
– alloys that contain less than 50% copper and/or silver
– base metal alloys
– titanium and titanium alloys

SR Connect, 5 ml

Sr connect is a light-curing conditioner to bond light-curing
veneering materials to Pmma, heat- or cold-curing poly-
mers and resin denture teeth. these are the areas of
application:
Establishing a bonding layer in the case of
– individual shade and shape modifications of pre-

fabricated teeth and different veneering materials,
such as telio

cad and telio Lab.

– individual shade adjustments of denture base resins.

SR Modelling Liquid, 5 ml

Sr modelling Liquid is used to wet the dental technician's
instruments during modelling and as a modelling aid (wetting of
the brush to disperse the material, etc.). Sr modelling Liquid must
not be used as a bonding agent for the purpose of
modifying the consistency or in the case of subsequent
adjustments. Use Sr modelling Liquid only in very low
quantities.

SR Gel, 30 ml

Sr Gel is a glycerine-based masking gel that is impervious to
oxygen. the gel is applied to the restoration before polymerization
to minimize the formation of an inhibition layer on the surface of
the veneering composite. consequently, the gel ensures
complete curing of the restoration surface. do not
apply too thick a layer of Sr Gel.

Compatibility of SR Phonares

compatibility between denture teeth and
lab composite is an important criterion
particularly in the fields of partial and
removable denture prosthetics. therefore,
the shade of Sr nexco has been specifically
coordinated with the shades of Sr Phonares II.

Compatibility with IPS d.SIGN

and IPS InLine

the shade concept of Sr nexco and the
IPS InLine system has been modelled
after the shade system used for
IPS d.SIGn. thus, an opaquer, a dentin
and a suitable Incisal material are allocated
to each tooth shade. the shades of the
Effect, Gingiva and Stains materials are
coordinated with the shade systems of
Ivoclar Vivadent ceramic products, so that
a similar esthetic outcome can be achieved with the shade-
independent additional materials. Users are thus offered an efficient
work procedure.
the benefits include an easy and quick processing in the fabrication
of combination dentures and a simplified shade match with existing
ceramic restorations.

SR Nexco Gingiva concept

the Sr nexco Paste Gingiva shades are coordinated with
the Ivoclar Vivadent Gingiva concept of
the IPS InLine system,
IPS d.SIGn and IPS e.max.
thus, gingiva with a lifelike
shade effect can be created according to the same diagram with all
veneering systems particularly in implant superstructures.
In addition to the conventional Ivoclar Vivadent Gingiva concept,
Sr nexco Paste offers a new Intensive Gingiva shade (IG5) and a
Basic Gingiva shade (BG34). these materials can be used for
modifications and characterizations of e.g. IvoBase

dentures even

more quickly and easily.

SR Nexco Retention Flow

Sr nexco retention flow is a low-
viscosity opaquer component,
which can be applied into the
undercuts of the retention beads.
Sr nexco retention flow demonstrates a higher curing depth than
the shaded Sr nexco opaquers and can be quickly and easily
applied due to its flowable consistency. the application of Sr nexco
provides for a reliable bond between the metal framework and the
first opaquer layer.