Ivoclar Vivadent IPS PressVEST Speed - Manual (Page 5)

5
Safety notes
– Do not open the furnace during the first 20 minutes of preheating: Burn hazard caused by wax fumes that
might ignite in the air!
– This material contains quartz, which may cause lung diseases (silicosis or cancer) when inhaled. Prevent
the inhalation of dust and wear a suitable dust mask.
Physical data
(according to ISO 15912:2006)
– Flow characteristics:
116 mm Liquid concentration 50%
– Initial set: 11 minutes Liquid concentration 50%
– Compressive strength: 6 MPa Liquid concentration 50%
– Linear thermal expansion: 0.9 % Liquid concentration 50%
This material has been developed solely for use in dentistry. Processing should be carried out strictly according to the Instructions for Use.
Liability cannot be accepted for damages resulting from failure to observe the Instructions or the stipulated area of application. The user is
responsible for testing the products for their suitability and use for any purpose not explicitly stated in the Instructions. Descriptions and data
constitute no warranty of attributes and are not binding.