Dynex DX-LDVD22-10A - Manual (Page 26)

22
DVD Playback
3 Press CH+ or CH– to highlight Menu Settings, then press
ENTER/VOL+. The Menu Settings menu opens.
4 Press CH+ or CH– to highlight an option. Options include:
• Transparency–Press VOL+ or VOL– to adjust how
transparent the TV menu appears.
• Language–Press ENTER/VOL+ to enter the sub-menu,
then press CH+/- t o select the menu language from
English, French, or Spanish.
5 Press EXIT to close the menu.
Labeling an input source
You can add a label to an input source to make it easier to identify.
To label an input source:
1 Press MENU. The on-screen menu opens.
2 Press VOL+ or VOL– to highlight SETTINGS, then press
ENTER/CH–. The Settings menu opens.
3 Press CH+ or CH– to highlight Input Labels, then press
ENTER/VOL+. The Input Labels menu opens.
4 Press CH+ or CH– to highlight an option, then press VOL+ or
VOL– to change the setting. Options include:
• Input–To select the input to label.
• Label–To select the label. Options include:
• Custom–Select this option to input your own label.
• VCR
• DVD
• Set Top Box
• Satellite
• Cable Box
• Game
• PC
• Custom–To enter a custom label. Press VOL+ or VOL– to
move between fields and press CH+ or CH– to select the
number of symbol you want (up to ten) to label the input.
Press ENTER to confirm.
• Reset Input Labels–To reset all input labels to factory
default.
5 Repeat Step 4 to enter additional labels.
6 Press MENU to return to the previous menu, or press EXIT to
close the menu.
DVD Playback
Basic playback
To load and play a DVD:
1 Press DVD on the remote control to enter DVD mode.
2 When the TV displays “OPEN,” place a DVD in the disc slot with
the label facing the back of the TV.
The disc is loaded automatically after one to two seconds, then
the DVD player reads the DVD and displays the opening menu. (If
there is no disc placed in the DVD slot, “OPEN” will remain on the
screen.)
3 Press the cursor buttons on the remote control to select menu
options, then press PLAY/ENTER to start playback. You can also
press the digit buttons to select a menu option directly, though
some DVDs do not allow this during startup. During playback you
can:
• Press PAUSE to pause playback (still mode). The sound is
muted during still mode.
• Press PLAY/ENTER to resume normal playback.
• Press FWD
to fast forward through the disc. Each time
FWD is pressed, the fast forward speed changes.
• Press PLAY/ENTER to resume normal playback.
• Press REV
to fast reverse through the disc. Each time
REV is pressed, the fast reverse speed changes.
• Press PLAY/ENTER to resume normal playback.
• Press PREV
to repeat the current chapter. If you press
within two seconds of when the current chapter begins, it
will move to the last chapter until the start of the disc is
reached.
• Press NEXT to skip the current chapter and play the next
one.
• Press STOP to stop playback. The TV screen shows the
start logo. With some discs, such as DVDs or CDs, the player
can resume playback from the point where it was stopped.
4 Press PLAY/ENTER to resume playback from the location where
the playback was stopped.
5 Press STOP twice to stop completely.
Transparency 0 10
Language English
EXIT EXIT
CHANNELS SETTINGS
MOVE SELECT PREVIOUS ENTER MENU
PICTURE AUDIO
Settings Menu Settings
VOL -
CH+
CH-
VOL +
EXIT EXIT
Custom
40
60
45
R5
+5
CHANNELS SETTINGS
MOVE SELECT PREVIOUS ENTER MENU
PICTURE
Picture
AUDIO
Mode
Brightness
Sharpness
Contrast
Color
Tint
VOL -
CH+
CH-
VOL +
MOVE SELECT PREVIOUS EXIT ENTER MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
Settings
Parental Controls
Closed Caption
Computer Settings
Time
Menu Settings
Input Labels
VOL -
CH+
CH-
VOL +
Input Component
Label Custom
Custom
Reset Input Labels
EXIT EXIT
CHANNELS SETTINGS
MOVE SELECT PREVIOUS ENTER MENU
PICTURE AUDIO
Settings Input Labels
VOL -
CH+
CH-
VOL +
DX-LDVD22-10A_09-0042.book Page 22 Monday, March 9, 2009 1:17 PM