Dynex DX-LDVD22-10A - Manual (Page 10)

6
Using the remote control
Using the remote control
Installing remote control batteries
To install remote control batteries:
1 Open the battery compartment cover by pressing the release
button.
2 Insert two AA batteries into the battery compartment. Make sure
that the + and – symbols on the batteries match the + and –
symbols in the battery compartment.
3 Replace the cover.
Notes:
Do not mix different types of batteries.
Do not mix old and new batteries.
Remove batteries when they no longer have a charge. Chemicals may leak
into the battery compartment. Battery chemicals can cause a rash. If
chemicals leak, clean the battery compartment with a cloth.
Remove the batteries if you do not intend to use the remote control for an
extended amount of time.
Do not dispose of batteries in a fire. Dispose of them as hazardous waste.
7 CH+/CH-
VOL+/VOL– Press CH+ or CH- to go to the next or
previous channel in the channel list. For more
information, see “Selecting a channel” on
page 11.
Press VOL+ or VOL- to increase or decrease
the volume.
8 ENTER Press to confirm selections in an on-screen
menu or to open a submenu.
9 MENU Press to open the on-screen menu.
10 CH.LIST Press to open the channel list. For more
information, see “Selecting a channel” on
page 11.
11 FAVORITE Press to display the favorite channel list. For
more information, see “Setting up a favorite
channel list” on page 15.
12 TITLE Press to display the DVD title menu (when
available).
13 DISPLAY Press to cycle through information about the
DVD, including Time Elapsed, Time
Remaining, Chapter Elapsed, Chapter
Remaining, and Display off.
14 REV Press to fast reverse a DVD.
15 FWD Press to fast forward a DVD.
16 MENU Press to go to the root menu on a DVD.
17 PLAY/ENTER Press to play a DVD.
18 , , , and
Arrow keys
Press to navigate in the on-screen DVD
menus.
19 ANGLE Press to change the viewing angle of a DVD
(when available).
20 AUDIO Press to select the audio track of a DVD.
21 PROGRAM Press to program DVD playback.
22 OPEN/CLOSE Press to eject the DVD.
23 DVD Press to go to DVD mode.
24 PICTURE Press to select the picture mode. You can
select
Vivid, Standard, Energy Savings,
Theater, Sports, or Custom. For more
information, see “Adjusting the picture” on
page 12.
25 SLEEP Press to set the sleep timer. For more
information, see “Setting the sleep timer” on
page 21.
26 • (Dot) Press to enter a digital sub-channel.
27 GUIDE Press to display EPG OSD of the channel,
including program name. channel number,
program description, channel label and
program show time.
28 MUTE Press to turn off the sound. Press again to
turn on the sound. Does not affect
headphones.
29 INFO Press to display information about the
current program. For more information, see
“Displaying additional information” on page
12.
30 EXIT Press to close the on-screen menu.
31 ZOOM Press to select the aspect ratio of the picture.
You can select Normal, Zoom, Wide,
Cinema, or Auto Zoom. For more
information, see “Adjusting the TV picture”
on page 12.
32 SUBTITLE Press to turn on DVD sub-titles and select the
subtitle language.
# Button Description
33 SETUP Press to open the DVD General Setup Page.
Press twice to open the DVD Preference Page.
34 NEXT Press to go to the next chapter on a DVD.
35 PREV Press to go to the previous chapter on a DVD.
36 PAUSE Press to pause DVD playback.
37 STOP Press to stop DVD playback.
38 SLOW Press to play a DVD in slow motion. Each time
this button is pressed, the setting changes.
39 T.SEARCH Press to display the DVD search menu.
40 ZOOM Press to zoom in on the DVD picture.
41 A-B Press to replay a selected portion of the DVD.
42 REPEAT Press to repeat a DVD chapter. Press again to
repeat a DVD title. Press again to repeat the
entire DVD. Press again to cancel.
43 DVD 10+ If a chapter or track number is over 10, press
this button, then press the number for last
digit in the chapter or track number.
# Button Description
DX-LDVD22-10A_09-0042.book Page 6 Monday, March 9, 2009 1:17 PM