Dynex DX-LDVD22-10A - Manual (Page 17)

Adjusting the sound
13
• Color Temperature–Select Warm (increased red),
Normal, or Cool (increased blue).
• Backlight–Adjusts the overall brilliance of the screen.
• Noise Reduction–Selects the noise reduction mode to
reduce picture noise (snow). Choose High, Middle,
Low, or Off.
• Advanced Contrast–Turn this On to optimize the
picture display for a more vivid image.
• Reset Picture Settings—Resets all picture settings to
factory default.
Note: You can only adjust Brightness, Contrast, Color Temperature, Tint,
and Sharpness if you set the Mode to Custom.
3 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the computer image
To adjust the computer image:
1 Make sure that your TV is in VGA mode. For more information, see
“On-screen menu overview” on page 11.
2 Press MENU. The on-screen menu opens.
3 Press VOL+ or VOL– to highlight Settings, then press
ENTER/CH–. The Settings menu opens.
4 Press CH+ or CH– to highlight Computer Settings, then press
ENTER/VOL+. The Computer Settings menu opens.
5 Press CH+ or CH– to highlight an option, press ENTER/VOL+ to
open the sub-menu, then press V0L+/- to adjust. You can select:
• Auto Adjust—Automatically adjusts the image settings,
such as position and phase
• H-Position—Moves the image right or left
• V-Position—Moves the image up or down
• Clock—Adjust the clock setting of the picture
• Phase—Adjusts the focus of stable images
• Reset Computer Settings—Resets computer settings to
factory default
6 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the sound
Adjusting the sound
To adjust the sound:
1 Press MENU. The on-screen menu opens.
2 Press VOL+ or VOL– to highlight AUDIO, then press
ENTER/CH–. The Audio menu opens.
3 Press CH+ or CH– to highlight an option, press ENTER/VOL+ to
open the sub-menu, then press CH+/- to adjust. You can select:
• Equalizer—Select OFF for normal frequency response or
ON for optimized frequency response.
• Equalizer Mode—Selects the sound mode. You can select
Custom (for a customized sound mode), Standard,
Theater (for movies), Music (for musical programs), or
News (for news programs). You can also press AUDIO one or
more times to cycle through the available sound modes.
• Equalizer Setting—Lets you set custom audio settings
when you select Custom.
• Treble—Press ENTER/VOL+ to open the sub-menu,
then press V0L+/- to adjust the high sounds. (available
when the equalizer is turned off).
• Bass—Press ENTER/VOL+ to open the sub-menu,
then press V0L+/- to adjust the low sounds. (available
when the equalizer is turned off).
• Balance—Press ENTER/VOL+ to open the sub-menu,
then press V0L+/- to adjust the balance between the left
and right audio channels.
• MTS/SAP—Only available for analog channels. Also
available by pressing MTS/SAP on the remote control.
Options include:
• MONO—Select this option if there is noise or static on
weak stereo broadcasts.
EXIT EXIT
Custom
40
60
45
R5
+5
CHANNELS SETTINGS
MOVE SELECT PREVIOUS ENTER MENU
PICTURE
Picture
AUDIO
Mode
Brightness
Sharpness
Contrast
Color
Tint
VOL -
CH+
CH-
VOL +
MOVE SELECT PREVIOUS EXIT ENTER MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
Settings Computer Settings
Parental Controls
Closed Caption
Computer Settings
Time
Menu Settings
Input Labels
VOL -
CH+
CH-
VOL +
Auto Adjust
H. Position
V. Position
Phase
Reset Computer settings
50
50
29
MOVE SELECT PREVIOUS EXIT ENTER MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
Settings Computer Settings
Clock 50
VOL -
CH+
CH-
VOL +
EXIT EXIT
Custom
40
60
45
R5
+5
CHANNELS SETTINGS
MOVE SELECT PREVIOUS ENTER MENU
PICTURE
Picture
AUDIO
Mode
Brightness
Sharpness
Contrast
Color
Tint
VOL -
CH+
CH-
VOL +
MOVE SELECT PREVIOUS EXIT ENTER MENU EXIT
PICTURE
Audio
AUDIO CHANNELS SETTINGS
On
Custom
L5
Mono
English
Equalizer
Equalizer Mode
MTS/SAP
Audio Language
Equalizer Setting
Balance
VOL -
CH+
CH-
VOL +
DX-LDVD22-10A_09-0042.book Page 13 Monday, March 9, 2009 1:17 PM