ikan MR7 - Manual (Page 33)

33/51
5-10. SYSTEM
▪ Function 1, 2 :
It designates the functions on F1, F2, buttons on the front. For details, refer to the table
in section 3-4.
▪ Back Light :
It adjusts the back light intensity of the LCD panel.
The adjustment range is from 0 (min) to 40 (max).
▪ Front Button LED: Turns LED lights on the front of the monitor on/off, if front buttons
illuminate.
▪ Front Button Lock: Turns on/off the operation of the front button.
▪ Setup Load: This function changes configuration contents of the monitor.
- Factory Default: Initializes the configuration as the monitor shipping status.
- User 1, 2, 3, 4: Changes the configuration of menu as 1,2,3,4 status which user
saved.
▪ Setup Save:
Saves the configuration status of current menu on 4 items such as USER 1, USER2,
USER3, USER4, and could load and use by using the Setup Load function.
▪ Update Firmware:
- Serial: this is for firmware update with serial port.
- USB: this is for firmware update with USB port.
- REC Serial:
This function is not for user, for factory use only.
- REC SD Load:
This is for updating the recorder's firmware by using an SD Card.