ikan MR7 - Manual (Page 16)

16/51
5-1. VIDEO
▪ Brightness: Adjusts the perceived emitted/reflected light.
▪ Contrast: Adjusts perceived lightness/darkness.
▪ Chroma (HUE): Adjusts color saturation.
▪ Phase: Adjusts the screen color (status).
▪ Sharpness: Adjusts the clarity or crispness of the image.
▪ SDI 3G Mode: Indicates HD-SDI 3G signal use.
▪ SDI Switching: Stabilizes the screen when format signals are changed on Matrix
Boards or Routing Switchers.
- Normal: The screen may blink if the default setup is changed as the signal is
connected.
- Fast: Used to display a stable screen by minimizing changes of the screen .
▪ NTSC Setup: Selects 0 IRE, 7.5 IRE.
Operated on 7.5 IRE -> NTSC or SD level YUV model.
▪ Mosquito Filter: Filters the noise which occurs when processing a compressed signal.
▪ HDMI UV Swap: UV signal may change the display when the HDMI Mode is normal
and the input signal is set on graphic resolution; this function is used to display normal
color. [color space YUV-VS-RGB]?
▪ HDMI Mode
- Normal: Signal input only available.
- Convert: Display is available simultaneously with signal input and HDMI to SDI OUT.