ikan MR7 - Manual (Page 2)

2/51
Safety Instructions
● Keep monitor away from heat.
● Do not use the monitor in water or under conditions with high humidity or excessive
dust.
● Turn off the power and unplug the power cord, if the monitor or the monitor casing is
broken by a hit or fall.
● Refrain from using the monitor near high RF or other sources of electromagnetic
interference, this may affect the monitor’s performance or cause the monitor to fail.
● Use of the monitor in hostile or extreme environmental conditions may affect
performance or cause the unit to fail.
● Excessive vibration or physical shock may cause the monitor to fail. (This excludes
typical broadcast vehicle application.)
● Keep the monitor at a reasonable distance (at least 50 cm) away from wall or other
objects to allow proper air circulation, otherwise it may cause problems or failure of the
unit.
● Do not take apart the monitor or insert foreign objects. Disassembling may cause
defects to the unit and is not covered under warranty.
● Do not drop or subject monitor to extreme, rough use, it may cause defects to the
unit and is not covered under warranty.
● Do not use AC Power Cord and DC Adaptor simultaneously, it may cause defects to
the unit.
● Before connecting external equipment, unplug the power. After connecting external
equipment, plugin the AC power and power on the monitor. Otherwise, monitor may
cause defects to external equipment due to static electricity.
● If the monitor produces smoke, strange sounds or smells, disconnect the power and