ikan MR7 User Manual
Page 14
14/51
1) VU Level Meter Display
Can be turned On or Off in the Audio MENU configuration, or assigned to the
function keys on the front.
▶ On: Left (displays even CH), Right (displays odd CH).
▶ Off: It turns off the display of Level Bar.
▶ VU Meter Position: Top/Bottom selectable.
2) Waveform/Vectorscope Display
Monitor switches between Waveform, Vectorscope, 2x Waveform, Waveform &
Vectorscope together.
▶ Waveform or Vectorscope screen position can be adjusted to Left Top, Right Top, Left
Bottom, or Right Bottom on the Display section of the CONFIG Menu.
The display position is changed by Up (▲), Down (▼) buttons.
If interlaced input signal freezes for a long time, it may cause the
waveform to stick.
SDI 2Ksf signal may cause the Vectorscope to stick if the video freezes.
However, this may disappear after the video starts moving.
When using the HD-SDI format some areas may look distorted during
scaling of the Vectorscope.