ikan KVM-7050W - Manual (Page 8)

Shenzhen Konvision Technology Co,.Ltd www.konvision.com
8
False color can Intuitively observe and calculate illumination level in the image,
luminance and illumination values display mapping as luminance level, from darkest to
brightest, display blue, cyan, green, yellow, orange and red in turn.
Histogram
- YRGB histogram displays the hue distribution of the entire image under SDI input
condition, can intuitively display exposure of the image, display R, G, B 3 channels
independently.
Zebra
- Use zebra stripes to mark the parts which luminance is over the reference scope
specified by user (default 95%), aid the cameraman to control the illumination, to
avoid overexposure.
Vector scope
- Vector UV analysis for color bar signal input
Pixel Measure
- User can measure any pixel’s specific position and RGB value; also can compare the
YRGB value between any 2 pixels.
PIP/PBP
- SDI input signal can be displayed with another signal of VIDEO, S-VIDEO,
COMPONENT, HDMI simultaneously, and showing two pictures on the screen.
SWAP Function
- In PIP/PBP mode, two pictures can be swapped between each other.
Color Temperature
- Different color temperatures can be selected freely.
Image Size Setting
- The display mode is switchable among 16:9, 4:3, full screen, 1:1, and the original
image proportion.
Marker Setting
- Show frame borders, center marker, and safety area, etc.
HV Delay
- Display horizontal and vertical blanking area of SDI1 input signal.