ikan KVM-7050W - Manual (Page 30)

Shenzhen Konvision Technology Co,.Ltd www.konvision.com
30
Line: pixel vertical position
Sample: pixel horizontal position
Y: luminance as an absolute value (0-1023)
%: luminance level expressed as percentage (Y value/256) *100%
R%: red level expressed as percentage (red value/256) *100%
G%: green level expressed as percentage (green value/256) *100%
B%: green level expressed as percentage (blue value/256) *100%
R256: red level as an absolute value (0-255)
G256: green level as an absolute value (0-255)
B256: blue level as an absolute value (0-255)
● Factory Reset
This function is to reset the monitor to factory preset.
Please try to reset the monitor, when the following situations occur:
1. The monitor parameters are adjusted incorrect by user.
2. The monitor picture or sound is abnormal, and not due to hardware problem.
To do factory reset, please follow the below five steps:
1. Press MENU button to enter main menu.
2. Turn VOLUME knob to item Setup and select it.
3. Turn IMAGE ADJ knob to Factory Reset and select it.
4. The screen will refresh after following the instruction of turning the VOLUME knob.
5. Power off the monitor, and must wait for at least 5 seconds, then restart the monitor.
The monitor resets to factory preset.
● Remote Control
1. Hardware connection
Connect the monitor’s RS-232 serial port to the computer to remote control the
monitor by universal serial communication software.