ikan KVM-7050W - Manual (Page 27)

Shenzhen Konvision Technology Co,.Ltd www.konvision.com
27
to the second character, select
the character you need same as
first character, it’s also applied to
other characters. After finishing
selecting the 8 th character, press
the VOLUME knob, the “ok” will
turn red, rotate the VOLUME
knob to make the “ok” turn
yellow, press MENU to save and
exit. Only the “ok” turn yellow, it
will save successfully when press
MENU, otherwise, it will not save.
UMD Second
Window Char(this
item shows in
PIP/PBP mode)
xxxxxxxx Setting is same as UMD Main
Window Char.
F. Scope (only for SDI signal)
Waveform Mode
OFF
LUMA
CbCr
Full LUMA
Turn off the waveform mode
Display Y(luminance) waveform
Display CbCr waveform
Display Y(luminance) waveform
in full horizontal
Waveform Alarm 84%-100% Waveform alarm can be set
at any percentage between
84%-100%, it’ll alarm when
measured waveform reach
or exceed the value you set
and mark them with red
Waveform Scale Digital Display in digital