ikan KVM-2450W - Manual (Page 7)

Shenzhen Konvision Technology Co,.Ltd www.konvision.com
7
serrated image.
10BIT Signal Processing
- Signal input, signal processing and image output are 10bit data processing, to
ensure the details display of the image.
Y/C Input
- Decomposition for the luminance signal (Y) and chrominance signals (C) of the video
signal can be input through this connector.
SDI Input
- 3G/HD/SD-SDI video signal can be input through this connector.
YPbPr Input
- YPbPr video signal (Compatible YCbCr) can be input through this connector.
HDMI/DVI/VGA Input
- HDMI signal can be input via HDMI to DVI-I convertor through DVI connector, DVI
signal can be input through DVI connector, VGA signal can be input via VGA to DVI-I
convertor through DVI connector.
Signal Source Loop through
- Signal that linked to the input connector will be enlarged and linked to output
connector. SDI reclock loop out ensure the signal without enervation.
PIP/PBP
- Two SDI inputs signals display simultaneously as PIP (picture in picture) and PBP
(picture by picture).One SDI input signal can be also displayed with another signal of
VIDEO, S-VIDEO, COMPONENT, HDMI simultaneously, and showing two pictures
on the screen.
Audio level meter (UV+PPM)
- Show the audio level meter (UV+PPM) for SDI embedded audio.
Waveform
- Display input signal waveform and color scope for SDI signal input monitoring. It
includes luminance waveform, YCbCr waveform and full screen luminance waveform.
Luminance waveform will mark with red if over the value specified by user.