ikan KVM-2450W - Manual (Page 6)

Shenzhen Konvision Technology Co,.Ltd www.konvision.com
6
The following does not belong to failures:
1. If the static image displayed too long, it will have residual image, which should be
attributed to the characteristics of LCD display but not a failure. Residual image will
disappear automatically after a period of time .
2. If this device used in a cold environment, the screen may appear residual image.
This is not a product failure, when the monitor temperature changes, screen will
return to normal conditions.
3. LCD screen may appear tiny spots (red, blue or green), this is not a fault, LCD
screens are manufactured with high precision technology, and a small number of
pixels may not be able to show intermittent.
4. Screen and cabinet will become warm gradually during operating.
●
Features
High resolution LCD panel
- LED backlight and high resolution. High contrast, high-speed response and wide
viewing angle technology make the monitor can be used under variety of lighting
conditions.
Durable and lightweight design
- Full metal and lightweight design provides cameraman easily and safely to field
shooting, and save space for OB vans/studio rooms equipment.
Two Colors Tally Indicator
- Two colors Tally indicator as red and green, to monitor each input signal and check
ON-AIR mode .
Auto-detection of all color system (PAL, NTSC, SECAM)
- This unit detects the color system automatically.
3D video decoder
- Process 3D decoding on VIDEO signals, to realize better reduce cross color.
Motion-Adaptive Interlace to Progressive
- It converts interlaced video to progressive video by motion detection, reduce the