Alcatel POP 4 Plus 5056D - Manual (Page 41)

78 79
Lock screen message
Touch to input owner information which will display on the locked screen. This
function will not available when none screen lock setted.
Smart unlock
With Smart lock, you can set your trusted devices, places, face, voice, etc.. The
phone can recognise signals you set up like your device's proximity to your
home, your car's Bluetooth system, when the signals recognised, your phone
will keep unlocked when it's safe with you.
You must set a screen lock first when you enable this function.
10.2.3 Sound & notification
Use the Sound settings to configure ringtones for different events and
environments.
• Sound Slide to adjust volume for media, alarm, ringtone,
etc.
• Headset mode Mark the checkbox to enable headset mode.
Ringtones will only be heard from the headset if it
is plugged in.
• Also vibrate for calls Turn on the switch to vibrate the phone from
incoming calls.
• Do Not Disturb Touch to set how calls and notifications interrupt
whatever you are doing on your phone.
• Phone ringtone Touch to set your incoming call ringtone.
• Default notification
ringtone
Touch to set your default notification ringtone.
• Other sounds Turn on the switches to enable dial pad tones,
screen locking sounds, touch sounds and vibrate
on touch. You can also set your Haptic feedback
vibration duration here.
• Arkamys audio effect
activated
Turn on the switch to enable Arkamys audio
effect.
• When device is locked Touch to select whether to show all notifications
content, or don't show notifications at all when
device is locked.
• App notifications Touch to block, set priority, or allow peeking for app
notifications.
• Notification access Touch to view the notification listeners.
• Do Not Disturb access Touch to view installed apps that have requested Do
Not Disturb access.
• Power on/off ringtone Turn on the switch to enable ringtone when
you switch on or off your phone.
10.2.4 Apps
You use the Apps settings to view details about the applications installed on
your phone, to manage their data and force them to stop, to set whether you
want to permit installation of applications that you obtain from websites and
emails, etc.
10.2.5 Storage & USB
Use these settings to monitor the total and available space on your phone and
microSD card; and to manage your microSD card.
10.2.6 Battery
In the Battery screen you can select whether to display battery percentage in
the status bar or to enable intelligent power saving.
You can also view the battery usage data since your last full charge. The screen
also shows your battery status and how long it can still be used before your next
charge. Touch one category, then you can learn its specific power consumption.
You can adjust power use via the screen brightness or screen timeout in the
Display settings.
10.2.7 Memory
Open this setting to monitor your total memory, available space, and memory
usage data.