Guralp Systems CD1.1 - Manual (Page 34)

CD1.1 Tools for Platinum
6.2 Configuration options for the receiver
There are two levels of configuration options available:
standard and expert. The configuration screen is first displayed
in standard mode but extra options can be displayed by
clicking the “Expert” button at the bottom of the form.
6.2.1 Configurable parameters in standard mode
The configuration screen for the receiver is shown here in two
parts.
The User description is an alternative, human-readable label
for this instance. It is used, for example, in log files. If you are
building a complex application with several receivers, you
should set this to something which describes the function of
this particular instance. In most cases, this can be left at the
default setting.
The Enable check-box controls whether this instance is to be
automatically started each time the system boots or whether it
should be left to be started manually.
The Delete check-box, if ticked, will cause this instance to be
deleted when the form is submitted.
34 Issue C