Guralp Systems CMG-6T - Manual (Page 30)

CMG-6T
5 Specifications
Velocity output bandwidth 10s - 100 Hz (standard),
30s - 100 Hz (optional) or
1s - 100 Hz (model CMG-6T-1)
Velocity output sensitivity 2 x 1,200 V/ms -1 (standard),
2 x 10,000 V/ms -1 (optional)
2 x 2,000 V/ms -1 (optional) or
2 x 1,000 V/ms -1 (optional)
Peak output ±10V (20V peak-to-peak)
Lowest spurious resonance 450 Hz
Linearity > 90 dB
Cross-axis rejection > 65 dB
Electronics self-noise -172 dB (relative to 1 m 2 s -4 Hz -1 )
Operating temperature -40 to +75°C
Temperature sensitivity < 0.6 V per 10 °C
Mass recentring range ±3° from horizontal
Construction Hard anodised aluminium case
with 'O'-ring seals throughout
Case diameter 154 mm
Case height (with handle) 207 mm
Weight 2.49 kg
Power supply 10 - 36 VDC
Optional low-power version 5 VDC supply, ±4.5 V output
Calibration controls common signal and enable lines
exposed on sensor connector
Offset nulling potentiometers, adjustable
through case
Optional remote nulling microprocessor controlled motor
drives
Optional accessories Break-out box
Hand-held control unit
30 Issue B