Guntermann & Drunck Dynamic-UserCenter 32 Installation - Manual (Page 5)

The expansion »Dynamic-UserCenter 32«
G&D Dynamic-UserCenter 32 · 3
The expansion
»Dynamic-UserCenter 32«
By applying the expansion Dynamic-UserCenter 32, you can connect different target
modules to multiple G&D matrix switches.
You can group and assign the ports of the Dynamic-UserCenter 32 expansion accord-
ing to your personal preferences. Each group consists of a CPU port to which you can
connect a target module. In addition, you can add at least two Cluster ports to the
group. Connect the matrix switches that can access the target module to these ports.
Package contents
 2 × power cable (PowerCable-2 Standard)
 1 × rackmount set (19” RM-Set-435-1HE)
 1 × manual »Installation Guide«
 1 × manual »Config Panel web application«
IMPORTANT: The expansion Dynamic-UserCenter 32 is compatible to the target
modules of the DVI-CPU series and to the matrix switches of the DVICenter series.
ADVICE: The device’s default settings allow you to connect user modules of the
DVI-CON series instead of matrix switches to the Cluster ports.
You can change this setting under
Direct consoles in the web application.